ATCS for Desalination Plants

Desalination plants use large seawater condensers and heat exchangers. Biofouling and scale raise pumping power, reduce distillate output and increase chemical cleaning frequency.

Request Project Sizing

Key Benefits for Desalination

Protect Distillation Performance

Clean tubes maintain heat transfer and production rates.

Lower Chemical Consumption

Reduce biocide and acid cleaning cycles.

Seawater Corrosion Resistance

Duplex stainless and GRP-lined components for long service life.

Maintain Vacuum in MED/MSF

Lower condenser pressure supports efficient thermal processes.

Typical System Configuration

Desalination ATCS units are sized for high-flow seawater intake, with Duplex 2205 or 2507 collectors and ball injection controls tied to plant DCS. We provide material certificates for chloride-rich environments.

Item	Specification
Applicable tube ID	12 – 30 mm (custom up to 45 mm)
Ball material	EPDM, oil and seawater resistant
Collector material	Carbon steel / 316L SS / Duplex SS
Control	Siemens PLC, Modbus/BACnet to BMS
Communication	Remote monitoring and alarm feedback

Frequently Asked Questions

Yes. We adapt collector orientation and nozzle locations to the specific water box geometry of multi-stage flash or multi-effect distillation plants.

By keeping soft fouling off tube walls, ATCS significantly extends the interval between chemical cleanings.

EPDM with seawater-grade formulation; for high-temperature brine we can supply special compounds on request.

Get a Desalination ATCS Quote

Tell us your chiller / condenser model, cooling capacity and water quality. We reply within 24 hours with a tailored solution and ROI estimate.

Prefer email? Write to michealzhang969@gmail.com