Pharma and biotech plants treat cooling water as part of the controlled environment. Manual brush cleaning needs shutdowns that clash with validated campaign schedules.
The Operating Reality
A biologics site runs multiple chillers for clean-utility loops, HVAC and process cooling. Water-system hygiene is documented for GMP, so any manual intervention is a change-control event.
Why Fouling Hurts Here
Online cleaning removes the shutdown variable entirely and keeps condenser end-difference at ~1.2°C, supporting both energy and hygiene goals without a documented cleaning outage.
How Automatic Tube Cleaning (ATCS) Fits
- Sponge balls (DN100–500 compatible, 0.1 mm oversize) circulate every chiller cycle, sweeping tubes with no shutdown.
- End-difference is held near ~1.2°C instead of drifting to 3°C+, keeping compressor work in check (each 1°C of end-difference adds ~4% compressor load).
- Continuous sweeping prevents the biofilm layer (up to ~300× more insulating than clean tube) that manual schedules miss.
- Systems are sized to tube count and metallurgy — titanium, copper-nickel, stainless and carbon steel all supported.
Compliance & Standards
For new Chinese industrial and commercial cooling projects, online/automatic condenser cleaning aligns with GB/T 51357-2019 guidance that such measures be considered for energy-efficient cooling design.
Related Products
- Automatic Condenser Tube Cleaning System (ATCS)
- Constant Pressure Water Make-up System
- HVAC & Cooling Coil Cleaning Guide
FAQ
Explore more in our Automatic Condenser Tube Cleaning (ATCS) →