What does an automatic cooling-tower dosing system control?

It meters scale inhibitor, corrosion inhibitor and biocide in proportion to monitored conductivity, pH and ORP, and trims blowdown accordingly — keeping all three water-quality parameters in range without manual batches.

Does automatic dosing reduce water use?

Yes. Conductivity-based blowdown control typically cuts blowdown ~20% versus conservative fixed settings, lowering make-up water and discharge cost.

Is it relevant for Legionella risk management?

Biocide is dosed to a stable residual and the record is logged automatically, which supports Legionella-risk control and compliance documentation for commercial property.

Can it retrofit existing towers?

Yes. Dosing skids are installed on the make-up or side-stream line of existing cooling towers without re-piping the tower itself.

What does an automatic cooling-tower dosing system control?

It meters scale inhibitor, corrosion inhibitor and biocide in proportion to monitored conductivity, pH and ORP, and trims blowdown accordingly — keeping all three water-quality parameters in range without manual batches.

Does automatic dosing reduce water use?

Yes. Conductivity-based blowdown control typically cuts blowdown ~20% versus conservative fixed settings, lowering make-up water and discharge cost.

Is it relevant for Legionella risk management?

Biocide is dosed to a stable residual and the record is logged automatically, which supports Legionella-risk control and compliance documentation for commercial property.

Can it retrofit existing towers?

Yes. Dosing skids are installed on the make-up or side-stream line of existing cooling towers without re-piping the tower itself.

Commercial Complex Cooling Tower Water Treatment — Representative Application Scenario

Illustrative: rooftop cooling towers of a commercial complex

Representative application scenario based on typical project data.

Project Snapshot

A mixed-use complex (retail + office, ~200,000 m² GFA) in Southeast Asia runs a district cooling plant with five cooling towers at ~600 m³/h each. The towers serve both mall and office loads with strong seasonal swing.

The Challenge

Manual chemical dosing was inconsistent — operators over- or under-dosed, causing scale on fill and heat-exchange surfaces and periodic Legionella-risk spikes.
Corrosion coupons showed rising loss; blowdown was set conservatively high, wasting water.
No closed-loop record of inhibitor vs. biocide vs. pH, making compliance documentation hard.

Solution

An automatic chemical dosing system for cooling water was installed, metering scale inhibitor, corrosion inhibitor and biocide against monitored conductivity/pH/ORP, with proportional blowdown control. Setpoints follow a typical cooling-water program rather than fixed manual batches.

Representative Results

Scale and corrosion brought under control; fill-pack life extended versus the prior manual regime.
Blowdown reduced ~20% through conductivity-based control, lowering make-up water and sewer cost.
Biocide dosed to a stable residual — Legionella-risk management documented automatically.
Dosing errors eliminated; chemical consumption optimized.

Why It Matters for Commercial Property

For malls and offices, tower water treatment is a compliance and cost item, not a discretionary one. Automating it removes the human-error variable and produces the audit trail property managers need.

FAQ

Explore more in our our Case Studies →

Project Snapshot

The Challenge

Solution

Representative Results

Why It Matters for Commercial Property

Related Products

FAQ